Rockford Fosgate amplification at an unbelievable value. The R150-2 2-channel amplifier pumps out more than enough to power a set full-range or component speakers, or you can bridge it into a 4-ohm load to produce 150 watts for a single R1S410 10" or R1S412 12" woofer.  Rockford Fosgate amplification at an unbelievable value. Click to enlarge. |
 RCA inputs and pass-through jacks. |
 Years of engineering expertise, hand craftsmanship and critical testing procedures. |
Power and Protect LEDs
The Protect LED illuminates if a short circuit or to low of an impedance is detected at the speaker connections. The amplifier will automatically shut down if this occurs.
RCA Input Jacks
The industry standard RCA jacks provide an easy connection for signal level input. They are nickel-plated to resist the signal degradation caused by corrosion.
RCA Pass-Thru Jacks
This Pass-Thru provides a convenient source for daisy-chaining an additional amplifier without running an extra set of RCA cables from the front of the vehicle to the rear amplifier location.
Gain Control
The input gain control is preset to match the output of most source units.
Crossover Switch
Selectable switch for 80Hz High-Pass (HP), All Pass (AP), or Low-Pass (LP) operation.
Variable Crossover (Low Pass Only)
A built-in 12dB/octave Butterworth filter with a crossover point variable from 50Hz to 250Hz.
Punch Bass
The Punch Bass control provides a bass boost up to 12dB @ 45Hz.
What's in the Box
Rockford Fosgate Prime R150-2 150 Watt Stereo Amplifier, User's Manual
